The Frequency Converter FCV 5G is an external module that combined with a field strength meter, displays frequencies between 3000 MHz and 4000 MHz, included the frequency range of 5G signal from 3600 MHz to 3800 MHz.
The displays of converted carrier will be into IF SAT band ie in the range of frequencies between 1000 MHz and 2000 MHz.
If the field strength meter has the Max Hold function, you can see the random signals (not continuously present), otherwise they are impossible to measure for their inconstancy.
The size is small and weight is very low, the power supply is between 13 and 18 volts, it is applied directly to the
RF output connector of the field strength meter.
SPECIFICATIONS
Input frequency | 3000 ÷ 4000 MHz with conversion of all range |
Input impedance | 50 Ohm (75 Ohm upon request) |
Input dinamic | -80 dBm ÷ -10 dBm |
Input connector | SMA female |
Output frequency | 1 ÷ 2 GHz |
Output impedance | 75 Ohm |
Return loss | ≥ 10 dB |
Output power | + 2 dBm (1 dB gain compression) |
Output connector | F female |
Type transfer | Conversion single SAT band (Down Converter) |
Gain | 0 dB ± 3 dB |
Stability Gain | ± 0.1 dB/°C (5 ÷ 40 °C ) |
Noise figure | ≤ 15 dBm |
Spuriousrejection | < 20dBμV without input < -39 dB input with single carrier of -10dBm |
Filterinput rejection | 45 dB at 2 GHz |
Oscillator frequency | 2 GHz |
Oscillator precision | ± 1 MHz |
In DC by RF connector | Remote feed (LNB) by RF output connector 13 ÷ 18 Volt / 0.2 A |
Calibration temp. | Environmental temperature (23°C ± 5°C) |
Operating temp. | from +5°C to+ 40°C |
Operating humidity | 80% for temperature until 31°C (linear reduction of 50% to 40°C) |
Operating altitude max. | 2000 m |
Dimension | (H x W x D) 150 x 90 x 25 mm |
Weight | 0,25 kg with bag |
Supplies | The device has nylon bag |