The Frequency Converter FCV300 EVO is an external module that combined with a field strength meter, displays frequencies between 2000 MHz and 3000 MHz
MAIN FEATURES
The Frequency Converter FCV300 EVO is an external module that combined with a field strength meter, displays frequencies between 2000 MHz and 3000 MHz. The main measurable signals are Bluetooth, Wi-Fi, MMDS and others signals in this frequency band. The displays of converted carrier will be into IF SAT band ie in the range of frequencies between 1000 MHz and 2000 MHz.
If the field strength meter has the Max Hold function, you can see the random signals (not continuously present), otherwise they are impossible to measure for their inconstancy.
The size is small and weight is very low, the power supply is between 13 and 18 volts, it is applied directly to the RF output connector of the field strength meter.
SPECIFICATIONS
Input frequency | 2000 ÷ 3000 MHz with conversion of all range |
Input impedance | 50 Ohm (75 Ohm upon request) |
Input dinamic | -80 dBm ÷ -10 dBm |
Input connector | SMA female |
Output frequency | 1000 ÷ 2000 MHz |
Output impedance | 75 Ohm |
Return loss | ≥ 10 dB |
Output power | + 5 dBm (1 dB gain compression) |
Output connector | F female |
Type transfer | Conversion single SAT band (Down Converter) |
Gain | 0 dB ± 3 dB |
Stability Gain | ± 0.1 dB/°C (5 ÷ 40 °C ) |
Noise figure | ≤ 15 dBm |
Spuriousrejection | < 20dBμV without input |
Filterinput rejection | 45 dB at 2000 MHz |
Oscillator frequency | 1000 MHz |
Oscillator precision | ± 1 MHz |
In DC by RF connector | Remote feed (LNB) by RF output connector |
Calibration temp. | Environmental temperature (23°C ± 5°C) |
Operating temp. | from +5°C to+ 40°C |
Operating humidity | 80% for temperature until 31°C (linear reduction of 50% to 40°C) |
Operating altitude max. | 2000 m |
Dimension | (H x W x D) 150 x 90 x 25 mm |
Weight | 0,250 kg with bag |
Supplies | The device has nylon bag |
P.IVA/VAT IT09108100158
