EV Charger AC single phase Model Commercial

– Maximum power 7,4 kW programmable

– Activation of the recharge by RFID Cards

– Dynamic power management

– Remote control system via LAN

Mechanical specifications

– Dimensions (W x H x D): 205 x 255 x 112 mm

– Body material: polycarbonate

– Operating temperature: -25 ºC… +45 ºC

– Storage temperature: -40 ºC… +60 ºC

– Operating humidity: 5%… 95%, condensation not allowed

– Mechanical resistance: IP66 / Ik09

– Net weight: approx. 4 kg

– Available accessories: pedestal and bracket for connecting cables and connectors

Electrical spefications

– Input voltage: single phase 230 V AC 50/60 Hz

– Maximum output current: 32 A programmable

– Maximum power: 7.4 kW programmable

– Charging type: Mode 3 AC according to IEC 61851

– Output voltage: single-phase 230 V AC (1P + N + PE)T

– Output: 5m cable with Type 2 plug or Type 2 socket interlocked with shutter

– MID certified energy meter

– Specific charging regulator for applications in AC charging stations in mode 3 according to IEC 61851-1

Available functions

– Type B differential monitoring with 6 mA threshold for release command to contactor

  via relay integrated 230V (type A external differential switch required as per CEI 64-8; V5)

– Monitoring of EP continuity

– Monitoring of the correct operation of the contactor through dedicated output relay

  (230 V / 4 A)

– Dynamic load management (DLM) compliant with ISO 15118 for optimized charging

  according to power installed available

– Connectivity via Ethernet cable to the network via integrated RJ45 port

– User identification through RFID / NFC reader integrated through CARD with RFID chip

– Master / Slave logic for managing multiple wallboxes in the same installation

– Temperature detection via integrated sensor for charging optimization in relation to the

  room temperature

– Power Line Power Line (PLC – Plug & Charge) vehicle communication compliant with

  ISO 15118e

• Brochure_Electric_Mobility_EN
• EV_Charge_Commercial_7.4_EN